Hi… I am transferring “TEST” string from the USART 1 to the hyper terminal. But at hyper terminal end I get only the char “T”. After that microcontroller unable to transfer the data. Please go through the following program, is there any problem in the code.This code is written for stm32 arm controller.
#include <stm32f10x_lib.h> #include <stdio.h> #include"stm32_reg.h"
int main() { unsigned char a[]="TEST",i; RCC->CFGR=0x001D8402; RCC->CR= 0x01010082; RCC->APB2ENR |= RCC_APB2ENR_AFIOEN ; AFIO->MAPR &= ~(1<<2) ; RCC->APB2ENR |= RCC_APB2ENR_IOPAEN; GPIOA->CRH &= ~(0xFFUL << 4); GPIOA->CRH |= (0x0BUL << 4); GPIOA->CRH |= (0x04UL << 8); RCC->APB2ENR |= RCC_APB2ENR_USART1EN; USART1->BRR |= 0x27<<4; USART1->BRR |=0x1; USART1->CR1= 0x0000; USART1->CR2=0x0000; USART1->CR3=0x0000; USART1->CR1|=0x8; USART1->CR1 |= USART_CR1_UE; for(i=0;i<7;i++) { USART1->DR=a[i] ; while (!(USART1->SR & USART_FLAG_TXE)); } }
I know that my first posting of code on the forum is wrong.Go through following code.
#include <stm32f10x_lib.h> #include <stdio.h> #include "stm32_reg.h" int main() { unsigned char a[]="TEST", i; RCC->CFGR = 0x001D8402; RCC->CR = 0x01010082; RCC->APB2ENR |= RCC_APB2ENR_AFIOEN; AFIO->MAPR &= ~(1<<2); RCC->APB2ENR |= RCC_APB2ENR_IOPAEN; GPIOA->CRH &= ~(0xFFUL << 4); GPIOA->CRH |= (0x0BUL << 4); GPIOA->CRH |= (0x04UL << 8); RCC->APB2ENR |= RCC_APB2ENR_USART1EN; USART1->BRR |= 0x27<<4; USART1->BRR |= 0x1; USART1->CR1 = 0x0000; USART1->CR2 = 0x0000; USART1->CR3 = 0x0000; USART1->CR1 |= 0x8; USART1->CR1 |= USART_CR1_UE; for(i=0;i<7;i++) { USART1->DR=a[i]; while (!(USART1->SR & USART_FLAG_TXE)); } }