• State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 21 subscribers
  • Views 1260 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

old license in uVision4

Philip Jones

Hi,
We have just bought uVision4 and STM32 dev. suit for new projects. We already have uVision2 and C51 and C166 from some years ago (using printer port dongles) to support older products.

How can I put the old product codes into the new uVision4 system so I can run everything from one Development Environment? It would save me having to run uVision2 and uVision4 on the same PC.

thanks for any help
PhilipJ

Parents
  • 0 in reply to Philip Jones

    I only know how to use old and new uVision when both are for same architecture, in which case the older uVision will reinstall and work with the newer license.

    But mixing architectures may not be possible, so you really have to talk with Keil. Using the old uVision for the old system and the new uVision for the newer architecture would probably only require that you keep everything in separate root trees.

Reply
  • 0 in reply to Philip Jones

    I only know how to use old and new uVision when both are for same architecture, in which case the older uVision will reinstall and work with the newer license.

    But mixing architectures may not be possible, so you really have to talk with Keil. Using the old uVision for the old system and the new uVision for the newer architecture would probably only require that you keep everything in separate root trees.

Children
No data