• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 22 subscribers
  • Views 1039 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

scanf in uvison for mcb2300

chris gerretsen

Hi,I want to read in some data from for example hyperterminal and use it in uvision to further exucate in calculation etc.

Is it simply scanf(" %d , &etc) ???

Parents
  • 0 in reply to Thorsten de Buhr

    Many Thanks for your help guys.

    Basically I want to set up a menu type system for the mcb2300,so a command from the keyboard triggers the next stage of the program etc.

    I do have the retarget.c and will give what you have suggested so far but will surely have a few more questions in the not so distant future.

    thanks again

Reply
  • 0 in reply to Thorsten de Buhr

    Many Thanks for your help guys.

    Basically I want to set up a menu type system for the mcb2300,so a command from the keyboard triggers the next stage of the program etc.

    I do have the retarget.c and will give what you have suggested so far but will surely have a few more questions in the not so distant future.

    thanks again

Children
No data