HI, I am trying to connect IAR jlink with uvision 3.8. My computer is not even detecting the Jlink. It says the installation is not compelte, because it could not find the jlink.sys file. I am unable to find the jlink.sys file in my computer. Can someone help me in this?
not just the main revisions, it should have read
"to use SILabs release x.abc, you need Keil release y.def.
Erik
Hi,
I'm a bit *confused* about the two last posts. Technically there should be no big difference if that all are J-Links in a different robe :-) (black, blue, yellow, ...)
The J-Link itselv decides if it wants to operate or not, and this behaviour cannot be changed.
So, if the SI-Labs J-Link is not dependant on their GUI it should work with ARM7/9 J-Link / J-Trace or Cortex-M3 J-Link driver.
I do not have an SI Labs J-Link here so I cannot test ...
BR, /th.
1) SILabs do NOT have a Jlink, they have an interface to Keil that gives ICE functionality. BTW SILabs do not make ARMs, but '51s
2) the interface keeps changing and thus I GUESSED that your Jlink problems could be an interface mismatch due to a Keil change.
ok, I am *still_confused* about the J-Link problems ...
> HI, I am trying to connect IAR jlink with uvision > 3.8. My computer is not even detecting the Jlink. It > says the installation is not compelte, because it > could not find the jlink.sys file. I am unable to > find the jlink.sys file in my computer. Can someone > help me in this?
1st: The (yellow) IAR J-Link does _not_ work with Keil, because it is a special Version of the J-Link.
2nd: If your computer says, that the J-Link is not installed properly, please doanload the latest driver package from segger (http://www.segger.com), which includes the windows kernel driver for J-Link, which is needed.