• State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 21 subscribers
  • Views 1653 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Stand alone flash programming w/ ULINK2

Evert van Rossum

Hi guys,

I'm currently building and flashing my projects in my ARM9 MCU with the use of uVision IDE. This works perfectly!

I was wondering if there is any stand alone flash program that supports the keil ULINK 2 JTAG adapter and requires only the hex file (and maybe an .ELF file?) so I can program my chip without using the uVision IDE?

Thanks!

Parents
  • 0

    As far as I know, you can:
    * Use uVision4 command like - see the manual (hint: uv4 -f...). As long as there is no production involved, its perfectly legal (even using evaluation version).
    * Use FlashMagic if your chip is by NXP (serial ISP).
    * Use a secondary bootloader (fed by serial, USB, network etc).
    * Write it yourself...

Reply
  • 0

    As far as I know, you can:
    * Use uVision4 command like - see the manual (hint: uv4 -f...). As long as there is no production involved, its perfectly legal (even using evaluation version).
    * Use FlashMagic if your chip is by NXP (serial ISP).
    * Use a secondary bootloader (fed by serial, USB, network etc).
    * Write it yourself...

Children
No data