FIQ intterupt Function

I want to write function for fiq interrupt on LPC2378,
Here the program which I have try to run. But it gives error.

void T0isr(void) __fiq //__irq
{

T0IR = 1; /* clear interrupt flag */

T0TCR = 0;

Enable_Timer1();

T0TCR = 1;

VICVectAddr=0xff;
}

void Timer0_Init(int interval)
{ /*Load prescaler for 1mSec*/

T0PR=PRESCALER; /** * T0TCR: Timer 0 Control Register * 2: reset counters (both timer and prescaler) **/

T0TCR=2; /* * interrupt and clear when counter=match */

T0MCR=3; /* * interrupt every ms */

T0MR0=interval;

/** * T0TCR: Timer 0 Control Register * 1: enable counting **/

T0TCR=1;

// VICVectAddr4= (unsigned)T0isr; // Set the timer ISR address
// VICVectCntl4= 0x00000020 | 4;

VICIntSelect = 0x00000010; VICIntEnable= 0x00000010;
}

this program give error

freq.c(184): error: #130: expected a "{"

This program is running for irq but not for fiq.......
If anyone know the method of writing a fiq ...
please reply to me