We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
hi i got the following error while trying to link there is no compilation error the source code is
void timer0(void) interrupt 1 { TR0=0;//stop timer if(loadstatus==1 && onehour==0) //if motor is running and one hour has not gone increment the timer { if(count<20) // count++; else { count=0; if(sec<59) sec+=1; else { sec=0; if(min<59) min+=1; else min=0; } } } else { if(counterstate==1) { if(count>0) count--; else { count=19; if(sec>0) sec--; else { sec=59; if(min>0) min--; } } } } TH0=0x4B;//value loaded to timer is for 1/20 sec delay TL0=0xFD; TR0=1;//start timer }
the error generated is
*** ERROR L121: IMPROPER FIXUP MODULE: charge.obj (CHARGE) SEGMENT: ABSOLUTE OFFSET: 000BH
plz help me and give me solution soon
That is your problem!
This is not trivial stuff! You need to spend time studying the manuals and gaining familiarity with the tools before you will be able to use them effectively!
"is there any other c- compiler for 8051?"
Yes, there are many - but you will always get yourself into the sames kinds of mess if you just try to jump in without proper study/preparation.
"i think it is the problem of keil."
No, it is the problem of insufficient study.