• State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 21 subscribers
  • Views 2158 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

improper fixup error

rajendra thike

hi i got the following error while trying to link
there is no compilation error
the source code is


void timer0(void) interrupt 1
{
          TR0=0;//stop timer
          if(loadstatus==1 && onehour==0)
             //if motor is running and one hour has not gone increment the timer
          {
                  if(count<20)         //
                  count++;
                  else
                  {
                                count=0;
                                if(sec<59)
                                        sec+=1;
                                else
                                {
                                        sec=0;
                                        if(min<59)
                                                min+=1;
                                        else
                                                min=0;
                                }
                        }
                }
                else
                {
                        if(counterstate==1)
                        {
                                if(count>0)
                                        count--;
                                else
                                {
                                        count=19;
                                        if(sec>0)
                                                sec--;
                                        else
                                        {
                                                sec=59;
                                                if(min>0)
                                                min--;
                                        }
                                }
                        }

                }
        TH0=0x4B;//value loaded to timer is for 1/20 sec delay
        TL0=0xFD;
        TR0=1;//start timer
}

the error generated is


*** ERROR L121: IMPROPER FIXUP
    MODULE:  charge.obj (CHARGE)
    SEGMENT: ABSOLUTE
    OFFSET:  000BH

plz help me and give me solution soon

Parents
  • 0 in reply to rajendra thike

    Really?

    Did you actually read them thoroughly and carefully?

    Did you think about how what they said might apply to your situation?

    They said:

    "This error occurs when an instruction tries do make a memory access that is outside the scope of this instruction (for example MOVX @Ri outside of the PDATA page, or ACALL outside of the 2KB code memory block)."

    Have you checked to see if this might apply to your situation?

    Did you thoroughly and carefully read the linked pages which give examples?

Reply
  • 0 in reply to rajendra thike

    Really?

    Did you actually read them thoroughly and carefully?

    Did you think about how what they said might apply to your situation?

    They said:

    "This error occurs when an instruction tries do make a memory access that is outside the scope of this instruction (for example MOVX @Ri outside of the PDATA page, or ACALL outside of the 2KB code memory block)."

    Have you checked to see if this might apply to your situation?

    Did you thoroughly and carefully read the linked pages which give examples?

Children
No data