unable to write and read an alphabet from location (0xFF01) & then increment the location

By alphabet I mean all the alphabets from A to Z.and their data type is 'char'.I have taken an array storing all alphabets from a to z as

char p[26]={'A','B','C','D','E','F','G','H','I','J','K','L','M','N','O','P','Q','R','S','T','U','V','W','X','Y','Z'};


and the code i m using is:

while(i>=0 && i<=25)
{
        lcdcmd(0xC0);  //to clear lcd screen
        lcddata(p[i]);  //to send array to lcd.

        a=key(0);               //key function to see if  any key pressed//

        if(a=='U')      //if up key pressed

        i2=p[i++];       /increment the alphabets in array
        else if(a=='D') /if down key pressed
        i2=p[i--];        //decrement the alphabets in array
        delay(1000);

//---------end---
Could you let me know that for storing the incremented alphabet in array ,I am using 'i2'.Is this would store that alphabet which I want to select.

Now,the next step I want is to write that selected alphabet at memory location (0xFF01),read from same location and then display on lcd.Next,move to select any othet alphabet from array ,write at next location ,read and displayed at next postion on the lcd.
I hope know I am clear about my problem.
Could you please help me out with this.
Mainly,I am facing problem with the flash wite and read operation.
Would you please help me.

By alphabet I mean all the alphabets from A to Z.and their data type is 'char'.I have taken an array storing all alphabets from a to z as

char p[26]={'A','B','C','D','E','F','G','H','I','J','K','L','M','N','O','P','Q','R','S','T','U','V','W','X','Y','Z'};


and the code i m using is:

while(i>=0 && i<=25)
{
        lcdcmd(0xC0);  //to clear lcd screen
        lcddata(p[i]);  //to send array to lcd.

        a=key(0);               //key function to see if  any key pressed//

        if(a=='U')      //if up key pressed

        i2=p[i++];       /increment the alphabets in array
        else if(a=='D') /if down key pressed
        i2=p[i--];        //decrement the alphabets in array
        delay(1000);

//---------end---
Could you let me know that for storing the incremented alphabet in array ,I am using 'i2'.Is this would store that alphabet which I want to select.

Now,the next step I want is to write that selected alphabet at memory location (0xFF01),read from same location and then display on lcd.Next,move to select any othet alphabet from array ,write at next location ,read and displayed at next postion on the lcd.
I hope know I am clear about my problem.
Could you please help me out with this.
Mainly,I am facing problem with the flash wite and read operation.
Would you please help me.

No, no, no, NO!

A is a character, not an alphabet.
B is a character, not an alphabet.
C is a character, not an alphabet.

The union of A, B, C, ... Z represents an alphabet containing 26 characters.

The next thing is that the character 'A' in the ASCII encoding has the numeric value 65. The character 'B' has the value 66. The character 'C' has the value 67.

So you do not need to store the individual characters in memory. Why?

If you get the numeric value 65 from a serial port, that value represents an 'A'. And if your display is only a tiny bit normal, it will also make use of ASCII and know that when it receivers the numeric value 65, it should display the graphical form of an 'A' at the current cursor position.

But notice that the ASCII character table has the characters numbered in the normal sort order. So you do not need a lookup table to increment from a 'I' to a 'J'. If you add 1 to the numeric value of an 'I', you will get the numeric value of a 'J' - and can send this value to the display to show a 'J'.

Another thing. You wrote in your code:

lcddata(p[i]);  //to send array to lcd.

You are not sending any array. You are sending a single character. So your comment is wrong. An incorrect comment is worse than a missing comment.

idx = 0;
for (;;) {
    lcdcmd(0xC0);        // Clear the display
    lcddata('A' + idx);  // Send current character
    do {
        key = get_key();
    } while (key == KEY_NONE);
    switch (key) {
        case KEY_UP:
            idx = (idx+1) % 26;
            break;
        case KEY_DOWN:
            idx = (idx+26-1) % 26;
            break;
        default:
            // Some other key pressed.
            ;
    }
    delay(1000);
}

May be my comments are wrong but when I send the data to lcd it shows characters.But,i am not able to write it at location (0xFF01 ),read from same and then display on the lcd. could you tell me what is this symbol '%' in the code which you sent to me.I am not able to get it.selecting a character each time I want to form a string of variable length.I want to write ,read the characters in flash memory location starting at (0xFF01).

could you tell me what is this symbol '%' in the code which you sent to me
that makes it crystal clear that you desperately need to read a 'C' book. in mine it is in chapter 2

Erik