We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
hello everyone, I am reading some code on a system that connect the 8051 with an external ram chip but I have no idea what is going on with the code, I have been struggling on this for quite some time now, just want to see if anyone can point me to the right direction.
the first part i dun understand is how the ram is use
void k6x8008_writebyte (unsigned char hadd,unsigned char madd,unsigned char ladd,unsigned char indat) { RD = 1; WR = 1; k6x8008_laddress(ladd); k6x8008_maddress(madd); k6x8008_din(indat); k6x8008_din(indat); k6x8008_haddress(hadd); WR = 0; WR = 0; WR = 1; k6x8008_haddress(0x00); P0 = 0; WR = 1; }
i don't understand what those ladd, madd or hadd means at all
on the main code this is the part that requires writing data to the ram...
iphadd=((subaddress&HADDBITS)/0x00010000); ipmadd=((subaddress&MADDBITS)/0x00000100); ipladd=((subaddress&LADDBITS)/0x00000001); k6x8008_writebyte(iphadd,ipmadd,ipladd+0x00,0xff); k6x8008_writebyte(iphadd,ipmadd,ipladd+0x01,0xff); k6x8008_writebyte(iphadd,ipmadd,ipladd+0x02,0xff);
why does the coder uses binary division?? and this might be abstract but im also not sure why he is writing 0xff to the ram in the part above
Please read the instructions on how to post source code:
www.danlhenry.com/.../keil_code.png