• State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 21 subscribers
  • Views 1738 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ICP programing in LPC938

shilpa patel

how the ICP is used for programing LPC938. what is the procedure for this.

Parents
  • 0 in reply to erik malund

    but manual just explain it with mcb900 or EPM900 board. but i dont want to use this kit and want to make my own programmer. i m working with LPC938AND WAANT TO DO PROGRAMMING WITH ICP 7 PULSE ENTRY. so what is the requirements for this and what are the programming commands for this.

Reply
  • 0 in reply to erik malund

    but manual just explain it with mcb900 or EPM900 board. but i dont want to use this kit and want to make my own programmer. i m working with LPC938AND WAANT TO DO PROGRAMMING WITH ICP 7 PULSE ENTRY. so what is the requirements for this and what are the programming commands for this.

Children
No data