• State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 21 subscribers
  • Views 1180 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LPC2368 is not working with RL-ARM and MDK 3.70

David José

Without use the RTOS noticed that the clock processing decreases. Using the RTOS does not work.

Parents
  • 0 in reply to Andy Neil

    the OP indeed made some mistakes, BUT I do have a problem with 3.70: compiling one of my projects after a total clean works fine (controller starts up - FSFlash 'finit' always succeeds), but compiling once more (optinizations unchanged) causes my 'finit' to ALWAYS fail!
    I have reported this issue to Keil and still need to run a few tests on samples. This did not happen with 3.50.

Reply
  • 0 in reply to Andy Neil

    the OP indeed made some mistakes, BUT I do have a problem with 3.70: compiling one of my projects after a total clean works fine (controller starts up - FSFlash 'finit' always succeeds), but compiling once more (optinizations unchanged) causes my 'finit' to ALWAYS fail!
    I have reported this issue to Keil and still need to run a few tests on samples. This did not happen with 3.50.

Children
No data