• State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 22 subscribers
  • Views 3143 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

CAN code using LPC2129

seetaram naik

Hi every one, This is Seetaram, i wanted to communicate between sensor and controller using CAN bus. I m confusing to configure register. Please any one have the code send my id.. seetarama.naik@gmail.com
I will wait for ur reply.
With regards, Seetaram

Parents
  • 0 in reply to while ();

    No, that code is incorrect:

    // Communicate to it in the way that I expect it to

    What you "expect" is irrelevant - unless it is based upon a thorough understanding of the specifications.

    Therefore the prerequisite to all this is to study the specifications - for the sensor, the LPC2129, and the CAN bus in general.

    If you haven't done that, then even sample code won't make any sense to you - as it will obviously rely upon that understanding!

    See: www.8052.com/.../160143

Reply
  • 0 in reply to while ();

    No, that code is incorrect:

    // Communicate to it in the way that I expect it to

    What you "expect" is irrelevant - unless it is based upon a thorough understanding of the specifications.

    Therefore the prerequisite to all this is to study the specifications - for the sensor, the LPC2129, and the CAN bus in general.

    If you haven't done that, then even sample code won't make any sense to you - as it will obviously rely upon that understanding!

    See: www.8052.com/.../160143

Children
No data