• State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 21 subscribers
  • Views 4201 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PCI interface using uC

praveen k

Hi,

I need to design a PCI interface card using microcontroller. Is that possible? Or I should go for microprocessor.

Thanks
praveen

Parents
  • 0 in reply to Andy Neil

    I take it that you want to produce a PCI card for putting into the PC?

    If so, what is the card expected to do? That affects how much power the processor on the board needs.

    You will normally not find any microprocessor with any PCI interface for use on a PCI board, so you will need a PCI bus chip.

    On the other hand: There are processors available with the host side of a PCI interface, i.e. intended for use with PCI equipment.

Reply
  • 0 in reply to Andy Neil

    I take it that you want to produce a PCI card for putting into the PC?

    If so, what is the card expected to do? That affects how much power the processor on the board needs.

    You will normally not find any microprocessor with any PCI interface for use on a PCI board, so you will need a PCI bus chip.

    On the other hand: There are processors available with the host side of a PCI interface, i.e. intended for use with PCI equipment.

Children
No data