This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

program faulr?

Hello,

I'm (still) working on a project with the LM3S811.
At first i had some problems with the compiler in uVision but that is solved now!

Now i have a different problem, when i load my project i to the memory uvision says it is done, but when i reset the evalboard it does nothing!
I also did this with a example project, same problem!

I also tried to load the file with luminary micro flash programmer but i have the same problem.
When i load a .bin file that i know is good it does work!
So programming is going oke, but i think the problem lies in creating a .bin file.

I do this in uVision by putting the following line in a user command (after build);

C:/Keil/ARM/BIN31/fromelf.exe --output blinky.bin --bin blinky.axf

can anybody tell me what i am doing wrong??

Thanks,

Parents
  • Undefined symbol I2CMasterInitExpClk (reffer from osram96x16.o)

    Two things:

    1) please don't re-type error messages. Copy-pasting them avoids typos like the above "reffer" instead of "referred".

    2) That's a pretty clear error message. The module osram96x16 calls a function or uses a variable, named "I2CMasterInitExpClk", which doesn't exist anywhere in the code you told the linker to process. Find it and put it into the project.

Reply
  • Undefined symbol I2CMasterInitExpClk (reffer from osram96x16.o)

    Two things:

    1) please don't re-type error messages. Copy-pasting them avoids typos like the above "reffer" instead of "referred".

    2) That's a pretty clear error message. The module osram96x16 calls a function or uses a variable, named "I2CMasterInitExpClk", which doesn't exist anywhere in the code you told the linker to process. Find it and put it into the project.

Children