We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello,
I'm (still) working on a project with the LM3S811. At first i had some problems with the compiler in uVision but that is solved now!
Now i have a different problem, when i load my project i to the memory uvision says it is done, but when i reset the evalboard it does nothing! I also did this with a example project, same problem!
I also tried to load the file with luminary micro flash programmer but i have the same problem. When i load a .bin file that i know is good it does work! So programming is going oke, but i think the problem lies in creating a .bin file.
I do this in uVision by putting the following line in a user command (after build);
C:/Keil/ARM/BIN31/fromelf.exe --output blinky.bin --bin blinky.axf
can anybody tell me what i am doing wrong??
Thanks,
a long shot, I know: have you verified that the memory layout of the demo project matches the memory on your board...?