• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 21 subscribers
  • Views 1241 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

at89c52 Code Banking

help at89c52

Hi,

Please can anyone help me?
I'm using at89c52. Can you guide me how to do the configuration keil code banking?

I have do some testing. I create x1 common x23 bank's. After i compiled, it just generate the bank hex file. May i know how to generate the common.c hex file? Is it necessary to have common.hex to burn into MCU registers? The x bank.hex will be in to EEE2PROM.

Please can you check for me is it the circuit correct not?

Thank you very much.....

Parents
  • 0 in reply to help at89c52

    Can you help for me?

    Nobody can. The level of confusion in your questions indicates clearly that you are in way over your head. As in: you wouldn't even recognize a complete solution to your problems if it jumped at you.

    What you must do is stop immediately and go back several steps, to when you last really knew what you were doing. Then ask people for advice about how you might get from there to where you think you need to be.

Reply
  • 0 in reply to help at89c52

    Can you help for me?

    Nobody can. The level of confusion in your questions indicates clearly that you are in way over your head. As in: you wouldn't even recognize a complete solution to your problems if it jumped at you.

    What you must do is stop immediately and go back several steps, to when you last really knew what you were doing. Then ask people for advice about how you might get from there to where you think you need to be.

Children