We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello,
versions: Uvision 2, c51 version 6, 8051 processor.
Using the simulator in Keil, dscope. I have been unable to get either T0 or T1 to work as a counter. as a timer either T0 or T1, no trouble. I have studied and tried absolutly everything I can think of over a couple of weeks to no avail.
question: Has anyone tried or is willing to try the Keil example program download "8051 counter 0 example program". This also does not work for me. the only thing I can think of now is a config problem or I need a different DLL for the simulator.
I don't see it, if you point me to it and I'll try it.
http://www.keil.com/download/docs/95.asp
It worked as stated.
Thanks,
What dll is listed in your debug tab in option for target. I have S8051.dll, version 2.1.0.1. It does not work for me on 2 machines, both have the same dll/ version
I also have S8051.DLL but the version is 3.10.
I am running uVision 3. I didn't notice that you were 2 until just now.
Thank you for your help.
Two years ago I gave up on the simulator because of this problem. Back then my posting in this forum, of this same problem, received no replys. I had some time so I tried the simulator again, with even more effort before posting here.
Keil tech support just gave me a fix.
Thanks again.
Could you possibly post what the fix was - if there was a workaround, or if you needed an updated dll?
Several files were updated including the S8051.dll