• State Not Answered
  • Locked Locked
  • Replies 0 replies
  • Subscribers 20 subscribers
  • Views 599 views
  • Users 0 members are here
Options
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SPI Boot problem

Rajesh N

Hi All,

I am using startsemi processor 8133 which has ARM922t core, I have configured the processor for SPI boot (CKE pin is pulled high ).I have downloaded u-boot code to flash AT45DB642D, It could not able to boot from SPI as we were not able to see any messages serial console.

when we connected AXD debugger we are able to see the flash content on 0x000000 location.

We used same u-boot Image (ELF) was placed on RAM it executed properly without any issues as we see u-boot messages on serial console (Hyperterminal).

We are unable to find out problem with SPI boot with flash.

Best Regards,

Rajesh

0