• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 22 subscribers
  • Views 1222 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

seperate load and execution region for LPC24xx project ...

F D

Hi everyone,

I have a need to store my program in the internal flash memory of the LPC24xx but execute the code from RAM. I tried to use scatter-loading. The problem is that I cannot get my complete memory image copied to RAM. The linker puts my provided sections only in one of the required regions.
Could I get a example of how to generate a project that loads the image to flash but at execution time copies the image to RAM and executes from RAM

Thank you,
Frank

Parents
  • 0 in reply to Robert  

    Hi Robert,

    this is exactly what I do but the library code always crashed.
    Now I found the reason. I accidentally selected MicroLib in my project and this causes the crash in the library code. After deselecting the MicroLib my scatterloading works.

    Frank

Reply
  • 0 in reply to Robert  

    Hi Robert,

    this is exactly what I do but the library code always crashed.
    Now I found the reason. I accidentally selected MicroLib in my project and this causes the crash in the library code. After deselecting the MicroLib my scatterloading works.

    Frank

Children
No data