• State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 22 subscribers
  • Views 1054 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

i am facing problem while using aduc812 i2c for rtc interface

jaiganesh jai

hi.... i am facing problem while using aduc812 internal i2c controller for rtc interface please send me asm code also.i am using ds1307 rtc controller

Parents
  • 0 in reply to Catcus Blip

    but now, you have to implement.

    so can you tell me from where you have to start.

    i have made interfacing of 4 serial keys and LCD with my aduc812 successfully.
    i have tested code on circuit also and working properly.

    you have to take 4 switches for following purpose:

    1- Up,
    2- Down,
    3- Set-time,
    4-Set-Alarm.

    now the only thing is left RTC interface.

Reply
  • 0 in reply to Catcus Blip

    but now, you have to implement.

    so can you tell me from where you have to start.

    i have made interfacing of 4 serial keys and LCD with my aduc812 successfully.
    i have tested code on circuit also and working properly.

    you have to take 4 switches for following purpose:

    1- Up,
    2- Down,
    3- Set-time,
    4-Set-Alarm.

    now the only thing is left RTC interface.

Children
No data