• State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 22 subscribers
  • Views 620 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

help herrrrrrrrrre

dranger poudel

hello i'm a new to this microcontroller stuff
but i've already built the burner for 89s51
now for i'm not smart on my own
i need to have links to existing projects so i could use my microcontroller

well help
regard

Parents
  • 0 in reply to Dan Henry

    but i've already built the burner for 89s51

    1) have you made the circuit with absolutely no substitutions?
    2) is every chip decoupling cap mounted less than 5mm from Vcc and Gnd?
    3) are all connections as short as possible (I assume "flying leads")
    4) This is soldered, I hope, not a pegboard
    5) good luck, some have had success with this.

    Erik

    PS what does this have to do with Keil software?

Reply
  • 0 in reply to Dan Henry

    but i've already built the burner for 89s51

    1) have you made the circuit with absolutely no substitutions?
    2) is every chip decoupling cap mounted less than 5mm from Vcc and Gnd?
    3) are all connections as short as possible (I assume "flying leads")
    4) This is soldered, I hope, not a pegboard
    5) good luck, some have had success with this.

    Erik

    PS what does this have to do with Keil software?

Children
No data