Please note: We are aware of an issue affecting replies on the Arm Community forums, which may not be loading as expected.

We apologize for any inconvenience and appreciate your patience while we investigate and work to resolve the issue.

Thank you for your understanding.

  • State Not Answered
  • Locked Locked
  • Replies 28 replies
  • Subscribers 22 subscribers
  • Views 9144 views
  • Users 0 members are here
Options
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Array initialization in ext memory

kt venkatesh

Hi! i have use p89c669 microcontroller and am29f040b [512 kb] flash.When i using the external code memory i can't initialize the array that have more than 4 values.if i initialize more than that the program will not be executed.if i comment the array the program was executed.the code was

const char red [256] = {0x00,0x00...0x00,0x00};

please help me!

regrads,
K.T.Venkatesan.

Parents
  • 0 in reply to ImPer Westermark

    Hi ,
    I have designed a circuit with µPSD3200 which communicates with PC , µPSD3200 data to pc and gets data from pc with rs232 .
    i want to send and receive numbers from zero two FF , not ascii , just hex code from 00 to FF (in decimal : 0 to 255) .
    but , i have read that the computer and micro sends ascii code , and ascii codes does not support the whole range of 00 to FF , so what shall i do ?

    omid

Reply
  • 0 in reply to ImPer Westermark

    Hi ,
    I have designed a circuit with µPSD3200 which communicates with PC , µPSD3200 data to pc and gets data from pc with rs232 .
    i want to send and receive numbers from zero two FF , not ascii , just hex code from 00 to FF (in decimal : 0 to 255) .
    but , i have read that the computer and micro sends ascii code , and ascii codes does not support the whole range of 00 to FF , so what shall i do ?

    omid

Children