We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I am using the LPC 2294 and trying to display messages through HyperTerminal, using printf in my main(). However, there is no display when I start loading and debugging my project. I made sure that I am using the correct serial port and HyperTerminal is connected correctly because I tried out the Hello demo and it works. The problem arises when I switch from external RAM to Flash. printf works on xRAM but not on flash. Why?
Hi, thanks for replying to my post.
I used the standard Hello demo and it executes fine (LED D3 blinks and HyperTerminal blinks "Hello World"). I don't have EXTERNAL_MODE defined in that target option.
I'm thinking this could be a retarget issue? My program runs off xram fine, but when using the same exact codes on flash,it doesn't work. I commented out my printf's in flash and the LED blinks like how I written the code.
That was when I started comparing the Hello demo which runs on flash to my program. I have 2target settings on 1 project to make it easy to switch from Flash to XRAM, but it works on xram but not flash.