• State Not Answered
  • Locked Locked
  • Replies 20 replies
  • Subscribers 22 subscribers
  • Views 3642 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need help in interfacing of DS 1820 with 8051

aditya gupta

Hi all

how can i interface DS1820 temperature sensor with 89s52 uC. So that it can display temp on LCD.

thanks in advance

aditya

Parents Reply Children
  • 0 in reply to ImPer Westermark

    The manufacturers code may be a good starting point.
    not as good as the datasheet, I have seen much 'untested' "manufacturers code"

    But Google may be able to help with a link that has code ported for the relevant processor .... and is probably faulty.
    THEN we are AGAIN where someone who does not have the foggiest idea about what the code does can not find out what is wrong.

    I STRONGLY TOTALLY ABSOLUTELY advocate against using "sample code" till you (have the ability to) code it yourself. Then, if you have a problem, you can understand the "sample code" and there may be a hint as to what you, yourself, missed.

    Erik

  • 0 in reply to erik malund

    In this particular case, the manufacturer (Maxim) is not just providing "sample" code - but gives you a complete protocol implementation (apart from the target-specific timer).

    Yes, of course, you do have to spend some time reading the documentation - including the Datasheets - but it does work pretty much out-of-the-box