We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi I want to connect GSM modem to the STRE912 board I configured the uart which can recieve interrupt from modem I am using uart 0 for connecting the modem and uart 2 to debug the application but the modem is giveing timeout errorthe processor is str912Fw44 I used both ways ( by RS232 as well as TTL level to connect to the modem) but it gives timeout error
eg, what is AT+CMIS supposed to do...?
dear neil
I solved the problem it was due to not properbaud rate thanks for your valuable time and reply now I have to convert same code to RTX kernel
thanks