• State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 22 subscribers
  • Views 2513 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LPC2300 Bootloader

TP User

I are puzzled about LPC2300 bootloader,please give me some guidance, thanks!

1) bootloader in lpc2368 flash, Is it possible be earsed by Uvision3 IDE or the other flash utility?
2) in case the bootloader is earsed, how to restore it,
3) in uVision3 IDE, I selected Flash | Erase after this operating, i can't erase or programming the flash anymore, can i assert the bootloader in this LPC2368 is destroyed?

Parents
  • 0 in reply to Suvidh Kankariya

    Well, the reason for my question is the following:
    A few weeks ago I programmed 15 boards (LPC2368) using FlashMagic and everything went well.
    Now, on another 25 boards 10 out of them are not able to program this way, but they are programmable using ULINK2.
    Two persons had doublechecked all parts and wiring and they could not find any error. After replacing the cpu on one of the boards, FlashMagic was working.
    Now it looks like there are any flaw cpus.
    BTW all of them have the same date code.
    Is there anybody with the same experiance and/or any solution?

Reply
  • 0 in reply to Suvidh Kankariya

    Well, the reason for my question is the following:
    A few weeks ago I programmed 15 boards (LPC2368) using FlashMagic and everything went well.
    Now, on another 25 boards 10 out of them are not able to program this way, but they are programmable using ULINK2.
    Two persons had doublechecked all parts and wiring and they could not find any error. After replacing the cpu on one of the boards, FlashMagic was working.
    Now it looks like there are any flaw cpus.
    BTW all of them have the same date code.
    Is there anybody with the same experiance and/or any solution?

Children