We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi all,
hope I did not miss a similar topic here. I searched, but did not find anything appropriate.
I want to have my device (LPC2368) to be updatetable via USB. To accomplish that, I think about two separate applications, a simple + small USB program (as H I D device, located at adress 0) that, upon reset checks for an USB link and, if none exists, starts the second "main" application, starting at address, say 0x8000.
Upon an USB connection at startup, the bootloader would erase/program the flash using IAP.
How do I have to set up uVision/the linker to build this application a) at adr 0 for debugging / test purposes and b) at the higher address for release versions
any tips highly appreciated kind regards + thanx in advance
Guenter: thanx
Per: double thanx. That was the option I was looking for. I must say it is hidden well under "manage components" .. :) but that is what I was looking for.
ULI