We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi, Do you have faced with this problem ? The USB debug adapter runs but the IDE debugger not. I can put breakpoint on the first line of the main but no break, no timer it generated too, when i stop running no stop on the code line executing. It seems there is a problem just before the main call.
thx
Slowly breathe in.
Slowly breathe out.
Relax.
Ahhhhhh.
Slowly breathe in. Slowly breathe out. Relax. Ahhhhhh. the watchdog discussed here is an electronoic device, not a sleeping collie
Erik
PS Every time you build you link with that code was never the issue, the issue was init.a51. yes, there is a C_INIT or some such (I could look, but if you need the specific, look yourself) in the .m51 file which I have known for years, but AGAIN the issue was init.a51.
Every time you build you link with that code was never the issue, the issue was init.a51. yes, there is a C_INIT or some such (I could look, but if you need the specific, look yourself) in the .m51 file which I have known for years, but AGAIN the issue was init.a51.
The key point is this: What code is contained in INIT.A51?