We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
On November 20th 2007, I was testing current release of Real-Time Library in WG Electronics in Warsaw. I had a problem with establishing connection PPP between ARM7 LPC2468 microcontroller (client ppp) and PC with Windows XP (host ppp). I was trying some settings combination but results were the same.
Received debug messages: PPP: Initialize PPP interface PPP: Initialize PPP-LCP PPP: Initialize PPP-PAP PPP: Initialize PPP-IPCP PPP: Dialing number: PPP: Username: 'Go..', Password: 'test1234' PPP: Sending LCP Configuration request PPP: Sending PPP frame PPP: Frame len: 26 PPP: Sending LCP Configuration request PPP: Sending PPP frame PPP: Frame len: 26 PPP: Sending LCP Configuration request PPP: Sending PPP frame PPP: Frame len: 26 PPP: Sending PPP-LCP Terminate request PPP: Sending PPP frame PPP: Frame len: 10 PPP: *** Processing PPP frame *** PPP: Frame len: 58 bytes PPP: Protocol: C021 PPP: *** Processing PPP-LCP frame *** PPP: LCP Config Request received PPP: Rejecting Unsupported Config Options PPP: Sending PPP frame PPP: Frame len: 44 PPP: *** Processing PPP frame *** PPP: Frame len: 8 bytes PPP: Protocol: C021 PPP: *** Processing PPP-LCP frame *** PPP: LCP Terminate Acknowledge Received
Thanks for any advice.
Pavelko
PPP: *** Processing PPP-LCP frame *** PPP: LCP Config Request receivedPPP: Rejecting Unsupported Config Options PPP: Sending PPP frame PPP: Frame len: 44
Which config options are not supported?? Is it possible to establish connection with Windows XP using release of Real-Time Library from 20th November 2007??
Well, if it isn't specifically documented, you'll have to either contact Keil support, or work it out - eg, by looking at the source code, and/or adding extra debug info to that log to say which option(s) it's rejecting...
That's debugging!
I fully agree with you but I don't possess source code and even library now. I mentioned that I was testing library in WG because I was interesting to buy it but I discovered that it's not working.