We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi ,
I have bought a MCB23xx development kit. We have to make a application on a windows XP machine which is going to talk to the MCB23xx board via the USB interface of the PC.
I have already configured the MCB23xx board to be a Human Interface Devices (HID) USB class type by downloading the HID example code firmware using a keil ulink2 debugger.
The code was picked up from the keil site and also i have tried and used successfully the HID client example code which is VC++ based for toggling few LED's on the board and sensing the keyboard interrupt.
My task is that i have to make a new vc++ based application which is going to have a edit box and when we type some thing in this box and when we click a send button on this GUI the typed string should go to the MCB23xx board and then appear on the LCD display present on the board.
Here are the few questions: 1)Has anyone used/worked on HID client (Host Side (PC) side) vc++ application. 2) Can i send the a string if i configure the evaluation board to be HID class type? 3)Can anyone provide me a documentation for the HID (VC++) based client application present on the keil site? 4) Also a documentation of the HID example code present on keil site would be very helpful, Has anyone used this code (Board side) for their custom application?
I will be grateful if someone answers my queries.
Thanks in advance, Amit
http://www.keil.com/forum/docs/thread11513.asp