• State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 22 subscribers
  • Views 1090 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Building Target problem

Daniel Duesentrieb

Hi there,

I am really new to all that Keil/uVision/Compiler stuff. In the office I am using a Olimex LPC-P2129 evaluation board with uLink2.
Today I just tried to build a target with one of the Keil Examples "http://www.keil.com/download/docs/291.asp". When I try to build the target I am getting a error message "failed to excetute 'as'... Could anyone give me an idea?

Parents
  • 0 in reply to ImPer Westermark

    Hi there... thanks for the reply.

    The link should guide you to the CAN Examples for Philips LPC2000 series... Yeh, sorry I am stupip... You are right..
    The examples from the Keil site will most likely only work with their RealView compiler. But I tried to compile with the gcc compiler that I installed...

    Any idea where to get some working CAN samples for the gcc compiler?
    Thanks.

Reply
  • 0 in reply to ImPer Westermark

    Hi there... thanks for the reply.

    The link should guide you to the CAN Examples for Philips LPC2000 series... Yeh, sorry I am stupip... You are right..
    The examples from the Keil site will most likely only work with their RealView compiler. But I tried to compile with the gcc compiler that I installed...

    Any idea where to get some working CAN samples for the gcc compiler?
    Thanks.

Children