This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Silicon Labs - development kit

Hello,
it it probably a stupid question, but can I use this DevKit www.silabs.com/.../ Microcontrollers/en/C8051F020DK.htm
within the Keil uVision IDE?
I mean to connect to the USB JTAG device, flash the chip and debug as well?
cheers M.

Note
This message was edited to reduce width.

Parents
  • not really.

    What I recommend is using the tool from ONE supplier instead of depending on SILabs and Keil being "in sycnch" which, often, has not been the case.

    Erik

    PS I am not a SILabs fan. They make some awful crap (deviates) in parallel with their excellent derivatives. I am not a Beatles fan, but I just love some of their tunes.

Reply
  • not really.

    What I recommend is using the tool from ONE supplier instead of depending on SILabs and Keil being "in sycnch" which, often, has not been the case.

    Erik

    PS I am not a SILabs fan. They make some awful crap (deviates) in parallel with their excellent derivatives. I am not a Beatles fan, but I just love some of their tunes.

Children