This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How done programming in keil

Hello Sir, I work on one project in which i control stepper through PC.I done programming in turbo C.
Now I want to used Microcontroller 89s51. i want to make programmer using parallel port & communicate using USB port.

I want to programming suppose in keil.Keil is new for me.My requiredment is i done calculation for speed control in my turbo C program,i also give the keyboard input to my turbo C program. This input is go to microcontroller though USB port.

Is it possible that many thing is done in keil programming?

Thank you.

Parents Reply Children
  • Hi,
    So, What is the other option for that ?.
    Because I want to control stepper motors & 4 video signal with Single USB port of my Computer.

    Thank you for help me...

  • "I want to control stepper motors & 4 video signal with Single USB port"

    So the big question is, how did you intend to send four video signals down a single USB link?!
    Relative to that, controlling a couple of stepper motors is a trivial task!!

    :-0

    You definitely won't do that on an 8051 alone!
    You would at least need dedicated video processing hardware, with the 8051 merely performing the control functions.

  • "So the big question is, how did you intend to send four video signals down a single USB link?!"

    UVC (USB Video Class) spec supports multiple video streaming interfaces on a single USB device. Then, theoretically, a single USB link can carry four video streams. But I didn't examine it on Windows. :-)

    Cypress EZ-USB FX2LP has 8051 core, and it provides Hi-speed USB connection to the external video processing hardware, like FPGA.

    Anyway, it is never a beginner's project.

    Tsuneo