This has been a frequent question recently, and the frequently-given answer is:
GNU support in uVision is now available via CodeSourcery. See: http://www.keil.com/appnotes/docs/apnt_199.asp
See: http://www.keil.com/forum/docs/thread12535.asp http://www.keil.com/forum/docs/thread12663.asp http://www.keil.com/forum/docs/thread12720.asp etc, etc...
My question is: if you've got Codesourcery - which includes a complete toolchain, IDE, debugger, etc - why would you also want uVision?
Hi,
As you said above, simulation in Keil eval version has problem with peripheral simulation (startup.s is an example). So, when I simulate the code segment of LPC2300.s file below. It can't jumb to Reset Addr. It only run sequentialy to the NOP and get stuck. Is it that problem ?
Vectors LDR PC, Reset_Addr LDR PC, Undef_Addr LDR PC, SWI_Addr LDR PC, PAbt_Addr LDR PC, DAbt_Addr NOP ; Reserved Vector ; LDR PC, IRQ_Addr LDR PC, [PC, #-0x0120] ; Vector from VicVectAddr LDR PC, FIQ_Addr Reset_Addr DCD Reset_Handler Undef_Addr DCD Undef_Handler SWI_Addr DCD SWI_Handler PAbt_Addr DCD PAbt_Handler DAbt_Addr DCD DAbt_Handler DCD 0 ; Reserved Address IRQ_Addr DCD IRQ_Handler FIQ_Addr DCD FIQ_Handler Undef_Handler B Undef_Handler SWI_Handler B SWI_Handler PAbt_Handler B PAbt_Handler DAbt_Handler B DAbt_Handler IRQ_Handler B IRQ_Handler FIQ_Handler B FIQ_Handler
Cheer