• State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 21 subscribers
  • Views 2662 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to set the buttons in the toolbox of simulation target?

du du

Hello
I run the measure project in the folder C:\Keil\ARM\RV30\Examples\Measure and I found that if the target is simulation, a tool box containing "Update windows", "My status Info", "Analog0 0..3V","Stop Analog0" items appears. I tried to find what defines the itmes in the tool box and I found that they are defined in the Measure.Opt as
OPTBT 0,(My Status Info)(MyStatus())
OPTBT 1,(Analog0 0..3V)(Analog0(3.0))
OPTBT 2,(Stop Analog0)(signal kill analog0). But I don't know how to set the items in the tool box by GUI of Keil IDE. Will someone tell me how to do? Thanks.

Parents
  • 0 in reply to du du

    Please read again my previous post:

    The buttons were defined as described in the User's guide (via the command window) when the example project was created and were saved automatically in the uVision project file.

    The define was entered directly in the command window (not part of measure.ini).

Reply
  • 0 in reply to du du

    Please read again my previous post:

    The buttons were defined as described in the User's guide (via the command window) when the example project was created and were saved automatically in the uVision project file.

    The define was entered directly in the command window (not part of measure.ini).

Children