Hi at All In LPC2364 the TX1 and RX1 pin on Uart1 are present in Port0 and Port2,is possible use both this pin for receive and transmit the data from two system? when device1 transmit/receive on Uart1 device 2 not comunicate with Uart 1 on LPC2364 and when device 2 comunicate with LPC devie 1 is quiet. Is possible flash the new program when use Flash Magic from one of this Port P0 or P2 where is connected UART1?
Regards Franco
According to the user manual, the boot loader is on UART0, not UART1.