• State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 22 subscribers
  • Views 1328 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

OCX file, How ?

lanmat fatgaf

Dear friends,

I want to make OCX file for 8051.

OCX file will send 3 bytes of data to ASYNC1

Command will be "Send2Com (Byte1,Byte2,Byte3)"

How can I do this ?

Thanks.

Parents
  • 0 in reply to Andy Neil

    The request is a bit similar to requesting instructions how to load and run Quake or World of Warcraft or similar on a pocket calculator. The calculator may be "a computer" but not the same type of computer as the games where intended to be run on.

    You don't run a 8051 processor with an operating system and then download one or more concurrent applications into it. Your application is _the_ application, and anything you want the 8051 to do has to be implemented into that single application. And that single application has to fit into the memory (code memory and RAM) of the uC. And you will have to settle for the processing speed of the uC. It is either fast enough, or it isn't.

Reply
  • 0 in reply to Andy Neil

    The request is a bit similar to requesting instructions how to load and run Quake or World of Warcraft or similar on a pocket calculator. The calculator may be "a computer" but not the same type of computer as the games where intended to be run on.

    You don't run a 8051 processor with an operating system and then download one or more concurrent applications into it. Your application is _the_ application, and anything you want the 8051 to do has to be implemented into that single application. And that single application has to fit into the memory (code memory and RAM) of the uC. And you will have to settle for the processing speed of the uC. It is either fast enough, or it isn't.

Children
No data