We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I'm attempting to get PPP working. I have a socketmodem connected to an LPC2468 on uart 1. have the serial driver working.
Do I need to include Std_Modem.c in my project?
Where do I make changes to support my particular modem?
I'm not finding this obvious.
Dave
If nothing else, your little example rewrite doesn't take into account that the connect will fail.
I knew somebody would point that out. It's just an example to show the problem, not real code.
Thanks Dave
Well, the small examples have an extraordinary way of sneaking themselves into production code somehow :)
Point taken, not this time though :-)
I should also mention that I am running RTX with round robin task switching, and there is also an ethernet interface.
I tried calling modem_dial() directly, and without even calling PPP_connect() it starts to try to send IPCP frames!
What triggers the PPP daemon to start the link negotiation?
Another observation: adjusting the timeouts for PPP in netconfig appears to have no effect. The initial packets are sent 2 seconds apart, even when I set all the timeouts to 10 seconds.