We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
If the interrupt vector address of Serial Port 0 is 0x3B, how to connect the response with uv3 serial window.
It has nothing to do with interrupt vectors.
www.keil.com/.../uv3_sm_uartcommunication.htm
You use the ASSIGN command, where the inreg and outreg parameters specify the port... http://www.keil.com/support/man/docs/uv3/uv3_cm_assign.htm