We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi guys. I changed my board to C8051F226 already and i'm using a 32.768kHz external crystal. I have read the datasheet for the oscillator. But i do not understand this sentence, can someone please explain it to me?
"Crystal Oscillator Mode with divide by 2 stage."
The datasheet also recommend me to do the following:
1.Enable the external oscillator 2.Wait 1 ms 3.Poll for XTLVLD '0' ==> '1' 4.Switch to the external oscillator
I have done the 1st 2 steps, but i can't seem to poll for XTLVLD. When i compile, it says undefined symbol.
Don't you think that you have to continuously read the value from OSCICN in you wait loop?
Why do i have to continously read value from OSCICN in my "wait" loop? OSCICN does not have any bits for me to poll. All the bits in OSCICN have been configured.