We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Dear all,
I uses MCB2300 ver3(LPC2360 on it). JTAG connection has no problem. I bought JTAGJet-Trace256K(signum), and a tyco-amp connector for ETM coneection whose pattern is printed on MCB2300. I exactly soldered a connector to MCB2300 boards 'ETM'. I checked all pins with schematics PDF file which is provided by keil. they were no problems.
But, when I connect my JTAGJet-Trace, JTAGJet couldn't recognize TRACE and even JTAG connection.
Then, I asked Signum cooperation. They answered, ETM wiring on MCB2300 is incorrect.
Can not ETM function work on my MCB2300? or, somehow Can I use ETM?
please advise.
your answer is greatly appreciated.
Kind Regards.
Yes, it can work with JTAG socket. it cannot work with ETM socket.
"it can work with JTAG socket"
There is no such thing as a "JTAG Socket"
JTAG specifies the signals on the interface, but does not specify any particular connector nor any particular pinout. Thus it is meaningless to just say, "JTAG Socket" - you need to state the specific connector and the specific pinout.
There is no reson to assume that the connector & pinout used by Keil for their own products will be compatible with any other products from any other providers!