We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I have designed board based on mcb2300 using lpc2368 as a ethernet tranciver I have used dp83848. I have check all the connections ,there is no difference with the board mcb2300 board.But dp83848 does not give any clock signal out of pin25.By this reason also the cpu cannot stop when I init tcpnet. I am using Keil TCP Stack. When I measure the signals on the mcb2300 board and my own board.I see that the signal level of TX-en pin are difference.
Pls help me with this topic
Please use another one, in case of any problem you can call me or an email to me.
Best Regards.
Cicek