• State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 22 subscribers
  • Views 531 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ARM9 Interrups on MCB-STR9

Ciar�n Dixon

How Do I use ST software Libraries to set-up an Interrupt using Button S1, S2 or Reset on Keil Dev Board MCB-STR9 ?

Parents
  • 0

    Hello Ciaron Dixon,

    If you want to use the ST Libraries (including ST Exeption Handler) and you use Keil startup code from file STR91x.s than you have to check the setting Setup Library Exeption Handlers.
    Use the Configuration Wizzard to check this setting in file STR91x.s.

    Best Regards,
    Martin Guenther

Reply
  • 0

    Hello Ciaron Dixon,

    If you want to use the ST Libraries (including ST Exeption Handler) and you use Keil startup code from file STR91x.s than you have to check the setting Setup Library Exeption Handlers.
    Use the Configuration Wizzard to check this setting in file STR91x.s.

    Best Regards,
    Martin Guenther

Children
No data