We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
hi all
i need a help regarding cs5460A adc.i dont know how to initialise the Cs5460A as a SPI inbuilt adc.i tried to intialise and i get some value,but it is not varying.if any one knows the coding or flow chart plz help me.thanx Sakthi
hi jonny sir i read the datasheet from the same link,what you have attached.
my problem is in coding.that is intialization of the registers in cs5460a.i used spi communication between 8051 and cs5460a.
I configured the required register of adc cs5460a for adc conversion.With or without load the same value is displayed in the seven segment led.
"my problem is in coding."
Are you sure?
You have already been told by two independent observers that the cs5460a seems like a very odd choice for this project.
" href= "http://www.8052.com/forum/read.phtml?id=134721">www.8052.com/.../read.phtml
Again, why do you think that the cs5460a is suitable for this project?
"With or without load the same value is displayed"
Couldn't that just be because the cs5460a is simply not able to measure the change resulting from this load?
"You have already been told by two independent observers that the cs5460a seems like a very odd choice for this project."
Now it's three:
www.8052.com/.../read.phtml