Keil forum Using MDK-ARM with J-Link

State Not Answered
Locked Locked
Replies 9 replies
Subscribers 22 subscribers
Views 3042 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Using MDK-ARM with J-Link

Henri Amario over 18 years ago

Hi everyone,

Can I connect MCBSTM32 demo board via Segger's J-Link and debug programs with MDK-ARM?

Thanks.

Parents

0 Andy Neil over 18 years ago

You mean this: www.segger.com/jlink.html ?
Cancel
Vote up 0 Vote down

Cancel

Reply

0 Andy Neil over 18 years ago

You mean this: www.segger.com/jlink.html ?
Cancel
Vote up 0 Vote down

Cancel

Children

0 Keil Software Support Intl. over 18 years ago in reply to Andy Neil

Segger JLINK is similar to SAM-ICE.

The usage of SAM-ICE is explained in:
http://www.keil.com/appnotes/docs/apnt_190.asp

You should be able to use the same with the SEGGER product.
Cancel
Vote up 0 Vote down

Cancel
0 Gyoergy Dozsa over 18 years ago in reply to Andy Neil

www.segger.com/news_070412_NXPfreeflashbreakpoints.html
Cancel
Vote up 0 Vote down

Cancel
0 Henri Amario over 18 years ago in reply to Keil Software Support Intl.

Hi,

I configure RDI driver as explained in http://www.keil.com/appnotes/docs/apnt_190.asp.
When I select Flash\Download in uVision3 I see mesages:
uVision-Flasher-ARM Error: STM32F10x_128.FLX
Cannot Load Flash Programming Algorithm
and
uVision3
Error: Flash Download failed-"Cortex-M3"
What does it means?

Thanks.
Cancel
Vote up 0 Vote down

Cancel