• State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 22 subscribers
  • Views 3042 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Using MDK-ARM with J-Link

Henri Amario

Hi everyone,

Can I connect MCBSTM32 demo board via Segger's J-Link and debug programs with MDK-ARM?

Thanks.

Parents
  • 0

    Yes, but you "MAY" need to obtain an RDI Interface driver from Segger. You can get a trial version from them valid for 30 days. You can buy the software for 198 Euros. You can buy a Keil Ulink2 for about 200 Dollars and then you do not need a RDI Interface driver.

Reply
  • 0

    Yes, but you "MAY" need to obtain an RDI Interface driver from Segger. You can get a trial version from them valid for 30 days. You can buy the software for 198 Euros. You can buy a Keil Ulink2 for about 200 Dollars and then you do not need a RDI Interface driver.

Children