We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Dear all, I want to start project with rgb led, what MCU i can use, ARM, AVR or PIC ? I have need 3 PWM Hardware not less than 10 Bit resolution, and eeprom memory inside mcu.
I must do 100% work myself.
Thank you for any comment or example similar project.
xgnetto
"You are going to make a traffic light with one RGB LED? Which country do you live in? Isn't it more common to use one red, one yellow and one green LED"
Unless your country prohibits the colour-blind from driving, it is essential that you do not use a single LED!
The commonest form of colour blindness is Red/Green - so these people need to be able to see physically distinct positions for the 'Stop' and 'Go' lamps!!
:=0
However, as an aside, I noticed recently that the railways here do now seem to be using signals with multi-colour aspects - but, presumably, you can't be a train driver if you're Red/Green colour blind...?
hi EveryOne,
thx for your help but ive got a better answre now! i Download From internet the project.
"i Download From internet the project."
So much for doing 100% of the work yourself, then...