Bitadressable area migrates from C51 to ARM7

Hello to everyone,
if have some assembler-programms for 8051-family.
There are about 60 LED's to control. All these LED have a corresponding Bit in the Bit-adressable area of the 8051-family:

                ORG     20H     ; 16 Byte bitadressable area
Digit0:         DS      1
Digit1:         DS      1
Digit2:         DS      1
Digit3:         DS      1
Digit4:         DS      1
                *
                *
                *

Led_01:      BIT     Digit3.6

Led_02:      BIT     Digit3.5

Led_03:      BIT     Digit3.4

Led_04:      BIT     Digit3.3

Led_05:      BIT     Digit3.2

Led_06:      BIT     Digit3.1

Led_07:      BIT     Digit3.0

Led_08:      BIT     Digit3.7

Led_09:      BIT     Digit4.7

Led_10:      BIT     Digit4.0

Led_11:      BIT     Digit5.6

Led_12:      BIT     Digit5.5

Led_13:      BIT     Digit4.6

Led_14:      BIT     Digit4.5
             *
             *
             *

Fan:            EQU     Led_01

Boost:          EQU     Led_29

Manual_control: EQU     Led_08

Remote_control: EQU     Led_59

Batterie_low:   EQU     Led_02
                *
                *

All this Led's have proper names and can be controlled by the following 8051-assembler-commands:

        SETB    Batterie_low
        CLR     FAN
        CPL     Boost
        MOV     Led_40,C

Finaly here's the question:
How can i replace these 8051 assembler code by ARM7 C?

Have a nice day to everyone!!!!!!!!!!!!!!!