We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello,
I am making a project where I need to use 14 outputs. I choose for that the entire Port 1 pins, P3.2, P3.3, P4.4, P4.5, P4.6 and P4.7. But I have a problem with that last four. They are part of the Port 4 and can function as general I/O or in its alternate function as address pins A16, A17, A18, and A19. Here is where my problem is. I can’t configure them to work as I/Os. I have read about configuring that in an assembler source called startup.a51 by the SFR registers P4CNT, P5CNT, P6CNT, MCON and MCON1. I have found different versions of that source file and tried a lot of different combinations in that registers, but I don't achieve what I want.
For all that, I would be very grateful if someone can explain me how to do it or can reply me with an example of the startup file configured correctly.
Best regards,
Gorka
is that you have to run all over creation to find the answers. http://www.keil.com/forum/docs/thread10623.asp
Erik